The 테스트 벤치 system uses a dynamometer with a dedicated load motor, in addition it supports both torque mode and speed mode. The controller provides precise torque and speed control, while the load motor offers fast and accurate response. Therefore allows for arbitrary load curve loading and waveform measurement during the motor testing process, meeting both steady-state and transient measurement requirements for motors and drives.
No-load test, rated test, peak torque, peak speed, durability test, temperature rise test, torque fluctuation, speed fluctuation, back EMF test, T-N curve test, motor start-up test, frequency band response bandwidth, driver performance test, efficiency cloud chart (MAP), forward/reverse speed difference rate, electrical time constant, torque control response time, speed control response time, dynamic position tracking error, braking torque test, speed adjustment rate, direct/alternating axis inductance, stall test, efficiency test, overspeed, thermal resistance, inertia simulation, electromechanical time constant.
LabView, custom display for the display module, report support with custom selection and recording.
The new TAS (Triple Accuracy System) precision guarantee system ensures testing accuracy through load control accuracy, Regarding high-precision torque and speed measurement, and mechanical installation accuracy.
Unique free-loading engine technology enables arbitrary load curve loading functionality. Therefore the system also supports loading waveform template settings, saving, and importing functions to improve testing efficiency.
The system has various control modes including ASR, ATR, and APR. As it also includes energy feedback, short-term overload, undervoltage protection, and overcurrent protection.
Supports IoT functionality, allowing production progress to be checked via a QR code. In addition the software supports remote online updates and has pre-diagnosis capabilities to eliminate faults in advance. Moreover it also features online monitoring of the equipment’s operating status.
Power Measurement Range | 1.5kW/3kW/5.5kW/ 15kW/30kW/45kW |
Speed Measurement Range | 3000rpm/8000rpm/15000rpm/ 20000rpm |
Torque Measurement Range | 5N.m/10N.m/20N.m/50N.m/ 100N.m/200N.m/500N.m |
Torque Measurement Accuracy | 0.05%/0.1%/0.2%/0.2%-0.5% |
Voltage Measurement Accuracy | 0.05%/0.1%/0.2%-0.5% |
Current Measurement Accuracy | 0.05%/0.1%/0.2%-0.5% |
질문이나 지원이 필요하시면, 다음 주소로 이메일을 보내주세요. [email protected].
신속한 대응을 목표로 하고 있습니다.
즉각적인 도움이 필요함? 우리에게 전화하세요 +86 156 1877 0706.
우리 팀은 당신을 도울 준비가 되어 있습니다.
다음에 위치한 저희 사무실을 방문하신 것을 환영합니다. 3에프, 건물 2, NO.511 샤오완 로드, 펑셴, 상하이, 중국.
귀하의 요구 사항을 직접 논의해 봅시다..
© 2025 상하이 EconoTechnology Co., 주식회사. 모든 권리 보유.
신뢰할 수 있는 테스트 솔루션을 통한 혁신 강화.
